Advanced search
40 search results
Page 3 out of 4 Pages
- Sources: How should I define initial vertical and lateral dimensions for volume sources?
Answer: When a volume source is chosen, the initial dimensions of the volume source plume must be determined. The table below from "Screening Procedures for Estimating the ... - General: How can I get results for different averaging periods?
Answer: The Screen model only produces 1-hour average results (with the exception of 24-hour estimates for complex terrain impacts), however, scaling factors can be used to ... - Receptors: Why do the automated a discrete distance options give different results at the same distance?
Answer: Technically, the concentration should be the same at the same distances. However, you are likely seeing ... - Sources: How can I model multiple sources?
Answer: Stacks that emit the same pollutant with similar exit parameters and which are within about 100m of each other may be analyzed by treating all ... - Meteorology: What is the anemometer height?
Answer: The anemometer height is the height above the ground at which the wind speed is measured. The default value for the anemometer height is ... - Terrain: What is the difference between "Complex" and "Complex + Simple" terrain?
Answer: Complex terrain is any terrain that is located above the stack height or above the release height. Terrain below the release height is referred ... - Meteorology: Which meteorology option should I use?
Answer: In general, the Full Meteorology option should be chosen as it covers all possible scenarios and provides the most conservative estimate when running SCREEN3 . ... - Terrain: What restrictions does the complex terrain option impose?
Answer: There are two cases which users should be aware of: The Meteorology option (options in the Meteorology tab) is not available for Complex Terrain. ... - General: Why do I need to specify a plot file along with my POST file?
Answer: When you specify a POST file to generate percentiles from Percent View will ask for a plot file as well if the POST file is ... - Installation: What rights do I need when installing any software from Lakes Environmental?
Answer: Lakes Environmental software applications must be installed under FULL administrative rights. Failure to do this may result in an unsuccessfully installation or issues running the software. ...
The most popular searches are:
- the (1127425x)
- wind direction (58989x)
- aermet view (36485x)
- 3 (17027x)
- ish data in new version (16613x)
- excel (8736x)
- non sequential hours (7894x)
- import (4422x)
- windows 7 (4141x)
- temp (4037x)